Starterkit STKa7x

• i.Mx7S
•  i.Mx7D

• DDR3L-SDRAM: Up to 2 GB
• Quad SPI NOR: Up to 256 MB
• Up to 32 GB eMMC flash
• EEPROM: 0/64-kbit

• LCD Interface (24-bit RGB)
• Up to 2 Camera Sensor Interface (24-bit/MIPI)

• Up to 2x Ethernet 10/100/1000 Mbit
• Up to 2x CAN
• Up to 2x USB 2.0 high speed OTG
• Up to 1x USB 2.0 high speed HOST
• Up to 7x UART

• Up to 3x SDIO/MMC
• Up to 4x I²C
• Up to 4x SPI
• Up to 3x I²S
• Up to 1x Smart Card
• Up to 1x PCIe

• Power supply 5 V
• Standard temperature range: -20°C…+85°C
• Dimensions 55 mm x 44 mm
• Plug-in system Board-to-board plug-in system 320 pins

• Linux
• VxWorks, QNX, WIN EC 2013 on request

TQMa7S-AA

• i.MX7S, 800 MHz, 8 GB eMMC, Flash, 512 MB DDR3L, 64 kB EEPROM, RTC, -20°C…+85°C

TQMa7S-AB

• i.MX7S, 800MHz, 8GB eMMC-Flash, 64 MB SPI NOR-Flash, 512MB DDR3L-SDRAM, 64kB EEPROM, RTC, -20°C…+85°C

TQMa7D-AA

• i.MX7D, 1,0 GHz, 8 GB eMMC Flash, 512 MB DDR3L, 64 kB EEPROM, RTC, -20°C…+85°C

TQMa7D-AB

• i.MX7D, 1 GHz, 8GB eMMC-Flash, 64 MB SPI NOR-Flash, 1GB DDR3L-SDRAM, 64kB EEPROM, RTC, -20°C…+85°C

STKa7x-AA

• STKa7x (Eval Kit) with TQMa7x-AA, Dual Cortex® A7/1,0 GHz, 512 MB DDR3L, 8 GB eMMC Flash, 64 kB EEPROM, RTC, 1x RS232, 1x RS485, 2x CAN 2.0 B separated, 3x USB 2.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100/1000, LCD Port, 1x HDMI, LVDS, 1x Mini PCIe, RTC, Temperature sensor, Reset-Button, SD interface, Power supply, 4 GB SD card, Cables

Starterkit STKa7x set

• The core of the STKa7x set is the TQMa7x module with a Dual Cortex® A7 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.