Get Hands-On with Altera Agilex™ 5: Develop Your Own SoC on the Macnica Sulfur Board!

Oct 01, 2024
Tulsa, Oklahoma

 

These in-person sessions give you a direct path to mastering the Altera Agilex 5 platform

From initial design to debugging FPGA components and memory, you will learn how to build a working SoC using the Macnica Sulfur Development Kit. 

 

Taught by senior engineers from Macnica 

This is your chance to level up on the next generation of ground-breaking high performance, power-efficient SoC FPGA technology.

This workshop is for:

  • FPGA design engineers. 
  • Colleagues are welcome to pair up (software developers, architects).

Prerequisites

  • Some experience with FPGA design tools
  • Linux experience is not required to complete lab exercises

By the end of the workshop, you will have accomplished the following:

  • Successfully built a working Agilex 5 SoC using the latest FGPA design techniques
  • Gained experience with bootloader capabilities and commands to debug FPGA components and memory
  • Worked through a bring-up of Linux for interaction with FPGA devices 
  • Experienced hands-on development with the advanced Macnica Sulfur kit 
  • Learned how to significantly reduce SoC design time for FPGA’s using Altera tools

Agenda

  • Introduction, technical presentation, Macnica Sulfur demos 
    (1.5 hours)
  • Hands-on lab exercises
    (3 hours)
  • Wrap-up and give-aways
    (1/2 hour)
  • Agenda may differ slightly between cities.
    Lunch will be provided