MBa6ULxL Single Board Computer

• i.MX6UL1, MX6UL2, MX6UL3, MX6ULL0, MX6ULL1, MX6ULL2

• DDR3L: Up to 1 GB
• EEPROM: 0/64-kbit
• eMMC: Up to 32 GB
• Quad SPI NOR: Up to 256 MB

• Ethernet: 2x Ethernet 10/100/Mbit
• Serial Ports: Up to 2x UART RS232
• CAN: Up to 2x CAN 2.0 B
• USB:
  • 1x USB 2.0 OTG
  • 2x USB 2.0 high-speed HOST interface
  • USB-Debug (RS232)

• SD Card: 1x SD-Card
• I2C: Up to 1x I2C
• GPIO: Up to 8x GPIO
• PCIe:
  • 2x Mini PCIe (only USB)
  • 1x SIM Card (mini PCIe)

• Power supply: 8 - 30 V DC
• Temperature range:
  • Standard temperature range: -25°C…+70°C
  • Extended temperature: -40°C…+70°C
• General: Temperature sensor
• Dimensions: 100 x 100 mm

• Linux
• QNX, INTEGRETY on request

• MBa6UL2L-AA with TQMa6UL2L-AA Cortex®-A7/528 MHz, 8GB eMMC Flash, 256 MB DDR3L, 64kB EEPROM, 2x USB 2.0, 1x USB OTG, 2x ETH 10/100, 1x Mini PCIe (only USB + SIM Card), 1x CAN, USB –Debug Interface, RTC, Temperature sensor, Reset-Button, SD-Card interface, -25°C…+70°C

MBa6UL2L-AB

• MBa6UL2L-AB with TQMa6UL2L-AA Cortex®-A7/528 MHz, 8GB eMMC Flash, 256 MB DDR3L, 64kB EEPROM, 2x USB 2.0, 1x USB OTG, 2x ETH 10/100, Expansion Interface 2,54mm Pin Header (8x GPIO´s, 2x RS232 (RX/TX), 2x I²C, 1x SPI), 2x Mini PCIe (only USB +1x with SIM Card ), 2x CAN, USB –Debug Interface, 1x Graphic Interface (40 pol. Glyn Platform Concept), RTC, Temperature sensor, Reset-Button, SD-Card interface ,-25°C…+70°C

• The MBa6ULxL set is delivered with a TQMa6UL2L module with a Cortex®-A7 CPU from NXP. The components contained in the single board computer constitute a modular system enabling you to develop your own product ideas. To develop your own hardware, you can use the certified and qualified circuit components of this platform in your own designs. Optionally, a display in the range of 3.5 “- 7” can be ordered for this set. For this platform, there is also a housing solution available to enable use as a complete system.