Starterkit STKa57xx

• AM571x
• AM572x 
• AM574x

• DDR3L-SDRAM: Up to 4 GB ECC Protection (optional)
• Quad SPI NOR: Up to 256 MB
• Up to 32 GB eMMC flash
• EEPROM: 0/64-kbit

• LCD Interface (2x 24-bit RGB), HDMI-Interface
• Camera sensor interface (2x 24b/2x 8b)

• Up to 2x Ethernet 10/100/1000 Mbit (IEEE 1588)
• Up to 4x Ethernet 10/100 (PRU)
• Up to 2x CAN 1x USB 2.0 high speed OTG
• Up to 1x USB 3.0 high speed Host
• Up to 10x UART

• Up to 2x SDIO/MMC
• Up to 3x I²C
• Up to 4x SPI
• Up to 4x I²S
• Up to 1x SATA 3.0
• Up to 2x PCIe

• Power supply 5 V
• Ambient conditions
  • Standard temperature range: -25°C…+85°C
  • Extended temperature range: -40°C…+85°C
  • Dimensions 75 mm x 55 mm
• Plug-in system Board-to-board plug-in system 400 pins

• Linux
• VxWorks on request
• QNX on request
• Android on request

TQMa5718-AA

• AM5718/1,5 GHz, 8 GB eMMC-Flash, 1 GB DDR3L-SDRAM, 64 kB EEPROM, RTC, -25°C…+85°C

TQMa5728-AA

• AM5728/1,5 GHz, 8 GB eMMC-Flash, 2 GB DDR3L, 64 kB EEPROM, RTC, -25°C…+85°C

TQMa5748-AA

• AM5748/1,5 GHz, 8 GB eMMC-Flash, 2 GB DDR3L-SDRAM, 64 kB EEPROM, RTC, -25°C…+85°C

• STKa57xx (Eval Kit) with TQMa574x-AA, Dual Cortex®-A15/1,5 GHz, 1 GB DDR3L, 8 GB eMMC Flash, 64 kB EEPROM, 1x RS232, 1x RS485, 1x CAN 2.0 B, 1x CAN-FD, 3x USB 3.0 HOST, 1x USB 2.0 OTG, 2x GbE, 2x PRU-ETH, LCD Port, 1x HDMI, LVDS, 2x PCIe, RTC, Temperature sensor, Reset button, SD-Card interface, Audio, Power Supply, 4 GB SD card, Cables

Starterkit STKa57xx set

• The core of the STKa57xx set is the TQMa57xx module with a Single/Dual Cortex®-A15 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.